How many minutes does the liquid perfusion process take?

Fluid insufflation is usually used to check whether a woman's fallopian tubes are blocked. No one wants to get sick, but if a disease like fallopian tube blockage occurs, it will affect women's fertility if it is not treated in time. If the disease is allowed to develop, it will not only affect women's physical health, but also have a great impact on women's daily life. How many minutes does the fluid insufflation process take?

How many minutes does the liquid flow process take?

The fallopian tube is open by injecting methylene blue solution or normal saline into the uterine cavity from the cervix, and then flowing from the uterine cavity into the fallopian tube. The resistance when the liquid is pushed in and the reflux of the liquid are used to judge whether the fallopian tube is unobstructed. Generally speaking, the liquid flow process takes about ten minutes to complete.

What is the specific method of fluid passage?

1. Empty the bladder, take the lithotomy position, disinfect the vulva and vagina, and lay a sterile surgical towel.

2. Bimanual examination is used to understand the size, position, texture, mobility, shape of the uterus and its relationship with the surrounding organs, and to check whether there are any abnormalities in the appendages on both sides.

3. Place the speculum, expose the cervix, disinfect the vagina and cervix, clamp the anterior lip of the cervix with a cervical clamp, and pull it outward to make the uterus horizontal.

4. Use a uterine probe to gently probe the uterine fundus along the direction of the uterus, measure its depth and confirm its curvature and size.

5. Check that the liquid flow device is intact and leak-free.

6. Insert the uterine drainage catheter into the cervical canal in the direction of probe detection and fix it at the pre-selected depth. Clamp the anterior lip of the cervix with tissue forceps to pull the cervix outwards, and at the same time push the conical head of the drainage catheter inwards so that the two fit tightly. Use a syringe filled with 20 ml of solution to slowly inject the liquid. If 20 ml of liquid is injected smoothly without resistance, there is no leakage outside the cervix, and the patient has no obvious discomfort, it means that the fallopian tube is unobstructed.

7. If resistance is encountered, apply a little pressure. The patient will have a little abdominal discomfort and the injection can be successfully completed. There is no leakage from the external cervical opening, which means that the original adhesion has been separated or the spasm has been relieved.

8. When the fluid is flowing, the sound of fluid coming out from the fimbria of the fallopian tube can be heard by listening with a stethoscope on both sides of the lower abdomen.

9. When you feel great resistance, fluid overflows from the external opening of the cervix, and your abdomen becomes unbearably bloated, it is usually because the fallopian tubes are completely blocked.

Although fluid perfusion is an effective detection method, it is not used in most cases. After all, although the liquid perfusion technology is safe, it also has certain risks. If it fails, it will cause great damage to the female reproductive system. However, only when the fallopian tubes are detected to be unobstructed can a woman become a mother, and all women need to take care of their bodies.