Is it normal for the wooden door frame to be a little loose? What should I do if the wooden door frame is a little loose?

We all know that door installation is an important part of house decoration. Many homes will install wooden doors. When installing wooden doors, they will also install suitable door covers, which can not only play a protective role, but also have a good decorative effect. So is it normal for the wooden door cover to be a little loose? Let's take a closer look!

Is it normal for the wooden door frame to be a little loose?

The wooden door frame is a little loose which is abnormal.

The wooden door frame of the set door includes the door frame and the door frame line. The door frame is the frame that covers the thickness of the wall, which is connected to the door leaf through hinges. The door frame line is the line on both sides of the wall, which is inserted into the door frame through a slot.

The door frame and the wall are fixed together through foam glue. A gap of about one centimeter is reserved between the door frame and the wall, and the gap is filled with foam glue. The door frame is fixed to the wall through the expansion of the foam glue. Generally, the door frame rarely loosens.

The door frame is inserted into the door frame through a slot, and the back of the frame is fixed to the wall with foam glue or glass glue.

Generally, door panels rarely loosen. If they loosen, it is most likely the door frame. Because the door frame is usually only 6 cm wide, it is relatively narrow, and the contact area between the back glue and the wall is also small, so it is easy to loosen. Generally, if they are installed properly, both the door panel and the door frame are very firm. If they are loose, it must be because they are not installed properly, which is abnormal.

What should I do if the wooden door cover is a little loose?

If the door frame becomes loose, you can remove the entire door frame, apply glass glue on the back, and then insert it into the door frame. You can ask the workers at the door factory to handle it, or you can do it yourself.

If the cover plate is loose, it is recommended to remove the wire and fill the gap between the cover plate and the wall with foam glue again to make the cover plate and the wall tightly connected. If the wire is loose, it is also necessary to remove the wire and find a way to make the connection between the wire and the cover plate more suitable. After installing the wire, use glass glue to seal the place where the wire contacts the wall, which can basically ensure that the wire will no longer be loose.

It is best to find a professional worker to handle this kind of thing. I believe that the seller of the door you purchased should be able to handle these problems for you. It should be noted that wooden doors are afraid of water. Be sure to do a good job of sealing at the connection between the door frame and the ground to prevent the water used when mopping the floor from entering the door frame.

What is the function of door cover?

Generally speaking, door covers have two functions: one is to improve the aesthetic effect of decoration, and the other is to provide protection for door panels and walls. The door cover is to protect the existence and presence of the door, which can protect the door from external forces and protect the part between the door and the wall from damage.

Therefore, when people decorate their homes, they can make door guards. Try to reduce the impact on the door, avoid damaging the door, and avoid damaging the wall. The door cover is usually integrated with the door, which looks dignified, grand, heavy, and beautiful. At the same time, the role of the door cover is also quite large, which can prevent the door from being damaged, corroded, dirty, etc., and always keep the door clean and tidy.

The principle of door frame

The wooden door frame consists of two parts, which we in the industry call the frame plate and the frame line. The frame plate is a wooden board installed in the middle of the door to fix the wooden door. The current installation method is to fill the space between the frame plate and the wall with foam glue. The foam glue will expand and bond the door frame plate and the wall. Then hinges are installed on the frame plate to connect the wooden door.

The cable is on the inside and outside of the door to cover the gap between the cover plate and the wall. The cover plate and the cable have a connection port. The cable is L-shaped. One side of the cable is inserted into the gap of the cover plate to connect them together.