Why are gas stoves so expensive? How do gas stoves work?

Behind every delicious meal, there are kitchen appliances that work silently, so we should cherish them so that they can last longer. The same is true for gas stoves. Next, let's learn about its working principle and why it is a little expensive. I hope it will be useful to you.

Contents of this article

1. Why are gas stoves so expensive?

2. Working principle of gas stove

3. Where is the solenoid valve of the gas stove?

Why are gas stoves so expensive?

The quality of a gas stove is closely related to its safety of use. The various components of a gas stove must not be cut corners. As the saying goes, a small mistake can lead to a big difference. Any poor quality can be a potential safety hazard. So don't underestimate a stove. Every component and every material inside it has strict requirements, so the price cannot be cheap.

Gas stoves refer to kitchen appliances that use liquefied petroleum gas (liquid), artificial gas, natural gas and other gas fuels for direct fire heating. Gas stoves are also called stoves. Everyone knows about their popularity, but it is difficult to see a common concept.

According to the gas source, gas stoves are mainly divided into liquefied gas stoves, coal gas stoves, and natural gas stoves. According to the stove eyes, they are divided into single stoves, double stoves, and multi-burner stoves.

How a gas stove works

Working principle: When the gas stove is working, the gas enters the stove from the air inlet pipe, enters the burner through the adjustment of the gas valve, and is mixed with a part of the air at the same time. This part of the air is called primary air. These mixed gases are ejected from the fire hole of the ignition distributor and ignited by the ignition device to form a flame. The air required for combustion is called secondary air. These flames are used to heat the cooker placed on the pot support.

Where is the solenoid valve of the gas stove

Location: At the connection between the ignition assembly and the burner.

Working principle of gas stove solenoid valve: There is a closed cavity in the gas stove solenoid valve, and through holes are opened at different positions. Each through hole is connected to a different oil pipe, and there is a piston in the middle of the cavity, and two electromagnets on both sides. The magnet coil will be attracted to which side through the valve body. By controlling the movement of the valve body to open or close different oil discharge holes, and the oil inlet hole is always open, the hydraulic sleeve will enter different oil discharge pipes, and then the piston of the oil cylinder is pushed by the oil pressure, and the piston drives the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the on and off of the current of the electromagnet.