Where is the integrated stove power supply placed? What is an embedded integrated stove?

Integrated stove refers to a kitchen appliance that integrates multiple functions such as range hood, gas stove, disinfection cabinet, storage cabinet, etc. Integrated stove is a kitchen appliance with the advantages of saving space, good fume extraction effect, energy saving, low consumption and environmental protection. Where is the power supply of the integrated stove placed? Let's learn more about it.

Contents of this article

1. What is an integrated stove?

2. What is an embedded integrated stove?

3. Where is the integrated stove power supply placed?

What is an integrated stove?

Integrated stove refers to a kitchen appliance that integrates multiple functions such as range hood, gas stove, disinfection cabinet, storage cabinet, etc. Integrated stove is a kitchen appliance with the advantages of saving space, good fume extraction effect, energy saving, low consumption and environmental protection.

The general integrated stove oil absorption rate reaches 95%. The higher the oil fume absorption rate, the better the quality. Some brands of integrated stoves have an oil fume absorption rate that reaches the limit of 99.95%.

Integrated stoves combine multiple functions such as range hoods, stoves, disinfection cabinets, storage cabinets, etc. They have the characteristics of high oil fume absorption rate, energy saving and environmental protection, ultra-quiet and intuitive display, saving space, costs and manpower operation procedures.

The integrated stove applies the principle of micro-aerodynamics and adopts deep well downward discharge or side suction downward discharge. The downward exhaust creates the principle of fluid negative pressure zone, which allows the oil smoke to be sucked downward like magic. You will no longer see the phenomenon of oil smoke rising everywhere, and the oil fume removal rate is over 95%.

What is an embedded integrated stove?

The embedded integrated stove is an upgraded version of the traditional integrated stove structure technology. Its biggest advantage lies in flexible installation and free combination, which can be used in different scenes of new and old kitchens. According to your daily cooking needs, you can freely match the disinfection cabinet, steamer, and oven to make the kitchen experience more free.

Integrated stove is a kitchen appliance that integrates multiple functions such as range hood, gas stove, disinfection cabinet, storage cabinet, etc. It is also called environmentally friendly stove or integrated environmentally friendly stove in the industry. It has the advantages of saving space, good fume extraction effect, energy saving, low consumption and environmental protection. The general integrated stove has an oil absorption rate of 95%. The higher the oil fume absorption rate, the better the quality. Some brands of integrated stoves have an oil fume absorption rate of 99% or 95%.

Where is the integrated stove power supply placed?

The integrated stove power socket should be grounded. The socket and gas interface are not allowed to be set in the same direction of the cabinet. For models that use a combination of an induction cooker and a gas cooker, the power cord diameter must be more than 1.5 mm, and the power cord diameter must be more than 3 mm to ensure that the power cord does not heat up under load.

The back of the integrated stove should be at least 5 cm away from the wall, and the side should be at least 20 to 25 cm away from the wall. If the wall is made of flammable materials, a fireproof layer should be installed between them. Since liquefied gas or natural gas is used, the installation location should be well ventilated to prevent a small amount of gas leakage and be discharged in time. When installing the whole machine, pay attention to the coordination with the cabinet to ensure that the whole machine can be moved after installation without being restricted by the cabinet. Pay special attention not to put the cabinet countertop on the machine.