What are the differences between oil-based caulking agents and water-based caulking agents? What are the construction steps of caulking agents?

Is the caulking agent soft or hard? What is the difference between oil-based caulking agent and water-based caulking agent? What are the construction steps of caulking agent? The simplest caulking process in a home improvement process can make us non-professionals scratch our heads and feel very troubled and entangled. There are a wide variety of products on the market. You must first understand yourself clearly and have a clear idea in your mind before you can perfectly complete the whole process and get off safely. If you are still not clear now, please read the following introduction of the Encyclopedia Knowledge Network carefully.

Contents of this article

1. Is the caulking agent soft or hard?

2. What are the differences between oil-based caulking agents and water-based caulking agents?

3. What are the construction steps of the seam beautifier?

Is the caulking agent soft or hard?

The key depends on the selected waterproof products and construction quality.

It has good lotus leaf effect and water-repellent properties, does not powder, does not fall off, is wear-resistant, does not fade, has rich and lasting colors, is non-toxic and odorless, and is green and environmentally friendly.

Suitable for filling fine seams when laying various indoor tiles. Suitable for humid environments. Made of rubber, asphalt and additives, it is a non-curing, non-film-forming, solvent-free creep-type paste waterproof material.

What are the differences between oil-based caulking agents and water-based caulking agents?

1. Different raw material components: Water-based caulking agent: made of polymers and pigments, with water molecules as the medium, can be hydrolyzed before curing, and the raw materials are all natural and non-toxic to the environment; Oily caulking agent: made of chemical materials and dyes, the oil forms a film on the surface to protect the internal materials from being decomposed, but a large amount of chemical materials are added, which helps to stabilize the properties, but has a certain impact on the environment.

2. Different degrees of environmental protection: Water-based caulking agent: natural raw materials soluble in water, environmentally friendly, suitable for all different spaces, and does not contain irritating gases and harmful substances during the construction process; Oil-based caulking agent: insoluble in water, contains many chemical materials, so it is affected by the ingredients and its environmental protection is worse than water-based because it contains irritating gases.

3. Different levels of cleaning difficulty: Water-based caulking agent: If it accidentally sticks to your hands, you can wash it off with water immediately before it solidifies. If it has already solidified, just use alcohol, vinegar or detergent to clean it: Oil-based caulking agent: Regardless of whether the caulking agent has solidified or not, it urgently needs to be removed with alcohol, vinegar or detergent, and it is difficult to clean and there will be residue.

4. There are differences in the construction environment: Water-based caulking agent: The construction environment should be kept dry, and water stains or moisture are not allowed, otherwise the caulking agent is very likely to be undried, bulging or whitening. Oily caulking agent: There must be no visible water in the construction environment, but it can be constructed in a slightly wet environment, and an oily caulking agent is more suitable for a long-term wet environment.

What are the steps for the construction of seam beautifier?

1. Tools needed: glue gun, scraper, sponge, masking tape, utility knife, brush, etc.

2. Choose the color of the caulking agent: You can decide the color of the caulking agent according to your own preferences, or you can ask a professional caulking master to recommend it. Many young people like the caulking agent color to be a little different from the tile color, such as white, silver, pearlescent color, gold and other colors that are more compatible.

3. Operation steps of caulking agent: remove the caulking agent nozzle, use pliers to clamp the material head, and then install the discharge nozzle. Use a paper cutter to cut the nozzle into a 45-degree angle. The width of the discharge nozzle should be the same as the width of the gap, and it is best if the discharge nozzle can enter the gap.

4. Construction method: Put the caulking agent into the glue gun, and gently apply the material in the gap. After applying one layer, use a scraper to smooth it until the surface is smooth. Try not to let the caulking agent overflow. If it overflows, wipe it clean with a sponge in time.