What is the difference between the maximum static pressure and wind pressure of an integrated stove? Why does the integrated stove automatically shut down?

Integrated stoves do bring high-quality and convenient life to people and meet people's kitchen needs. However, the smarter the thing is, the more functions it has, so it is inevitable that some small problems will occur. For example, why does the integrated stove automatically shut down? Including fault light, ignition does not respond, etc. It doesn't matter. Encyclopedia Knowledge Network will escort you. Today we will talk in detail about the specific circumstances of the integrated stove automatically shutting down.

Contents of this article

1. The difference between the maximum static pressure and wind pressure of the integrated stove

2. How to exhaust smoke from the integrated stove? Do I need to connect a smoke pipe?

3. Why does the integrated stove automatically turn off?

The difference between the maximum static pressure and wind pressure of the integrated stove

1. Maximum static pressure: Generally speaking, the larger the air volume, the faster and more timely the kitchen fumes can be exhausted. Under rated voltage and rated frequency, the integrated environmentally friendly stove runs at the highest speed. In a specific test device, when the static pressure value is zero, the corresponding exhaust volume is greater than 7m3/min.

2. Wind pressure: The greater the wind pressure value, the stronger the integrated environmental protection stove's ability to resist reverse wind. Wind pressure is an important indicator to measure the performance of the integrated environmental protection stove. If the exhaust pipe is long or connected to the public flue, due to the large loss of exhaust pressure, a greater wind pressure is required to ensure that the smoke is discharged.

How to exhaust the integrated stove? Do I need to connect the smoke pipe?

If you install an integrated stove in the kitchen, you need to consider various details, such as smoke exhaust. Does the integrated stove need to be connected to a smoke pipe? Let's learn about it together.

The smoke exhaust of the integrated stove needs to be connected to the smoke pipe. First of all, before purchasing the integrated stove, you need to understand the size of the integrated stove, and then when making the cabinet, you need to reserve the corresponding size of the integrated stove, power interface and the entrance of the smoke exhaust pipe. Then connect the smoke pipe of the integrated stove to the smoke exhaust pipe, push the integrated stove into the reserved cabinet slot, and you can use it.

Therefore, it is recommended that users who are preparing to install integrated stoves must do a good job of pre-buried smoke pipes. If the integrated stove has already been installed at home, you can check whether the pre-buried smoke pipes are correct, find problems in time and correct them. This will ensure that there will be no embarrassing backflow of oil smoke during future use, and keep the kitchen environment unpolluted.

Why does the integrated stove automatically turn off?

1. No gas. When the integrated stove automatically turns off, you should check whether there is still gas in the house. Some people forget to recharge the gas fee because of their own carelessness. If the gas fee is insufficient, then the home cannot be connected to the gas. No gas will naturally cause the integrated stove to automatically turn off. At this time, you should pay the gas fee in time to ensure that the gas can be used normally.

2. Overpressure protection. Some manufacturers will configure overpressure protection for integrated stoves. When the integrated stove is over-pressured, the integrated stove will automatically turn on this function to prevent the integrated stove from being damaged. Once the overpressure protection function of the integrated stove is turned on, the integrated stove will naturally be unable to start and will automatically shut down. At this time, a pressure reducing valve should be installed to try to reduce the pressure.

3. The battery is out of power. If the integrated stove needs to be ignited, it generally needs to use batteries. If the battery power of the integrated stove is insufficient, it is also easy to cause the integrated stove to automatically shut down. At this time, you should check in detail whether the battery power is sufficient and whether it is not installed properly. If the power is insufficient, you should replace it with a new one. If it is not installed properly, you should reinstall it.

4. Pipeline blockage. When the integrated stove automatically shuts down, you should also check the gas outlet valve of the integrated stove in detail. If you smell a pungent smell in the kitchen, it means that the gas pipeline is blocked. If the gas is blocked, it will inevitably cause the integrated stove to automatically shut down. At this time, you should clear the gas pipeline or directly replace the blocked position.

5. The ignition needle is dirty. The automatic flameout of the integrated stove may also be caused by the ignition needle being dirty. The kitchen is an area where cooking is often done. If the integrated stove is left for a long time, the ignition needle will inevitably be dirty with oil. At this time, the surrounding oil should be cleaned up.