What should I use to clean tiles? What kind of tiles should I use for bathroom walls?

Many friends are confused about how to choose tiles for the bathroom. Today, Encyclopedia Knowledge Network brings good news to everyone. Let's take a look. In fact, it should be based on both practicality and appearance. The bathroom wall uses tiles with low water absorption, so that the durability of the tiles will also be improved. It is recommended to use high-density wall tiles in the bathroom, so that the wall tiles are not easy to break and are easy to clean. Because there is a lot of moisture in the bathroom, it is recommended to choose tiles with patterns, patterns or matte surfaces when laying floor tiles, because this kind of tile has a non-slip effect and is safer when bathing. At the same time, it is recommended that the colors of bathroom tiles should not be too messy when choosing, which can easily cause visual fatigue.

Contents of this article

1. How to clean tiles brightly and cleanly

2. Do tiles need to be beautify the seams?

3. What kind of tiles should be used for bathroom walls?

What to use to clean tiles

It is recommended to use rice water, baking soda or milk and white vinegar to clean the tiles, which can make them bright and clean. Baking soda is a product specially used to clean kitchen and bathroom, and the cleaning effect is very good. When wiping tiles, it can not only make the tiles clean, but also make the tiles look very bright and full of gloss.

It is best to clean the tiles regularly with detergent, soap and other cleaning agents to always maintain the smoothness of the tiles.

In daily life, if you accidentally scratch the surface of the tile, you can apply toothpaste on the scratch and wipe it vigorously with a soft dry cloth to repair it.

If there are pollutants such as tea, coffee, beer, ice cream, grease, etc. attached to the surface of the tiles, they should be scrubbed in time to avoid the stains solidifying and becoming difficult to clean.

Do tiles need to be beautify the seams?

If conditions permit, it is best to beautify the joints of the tiles.

Reason 1: Sealing agent has the advantages of oil resistance and easy cleaning. After the tile seams are beautified, dirt is not easy to accumulate on the ground and it is easy to clean.

Reason 2: The caulking agent has strong toughness. The caulking agent can adapt to the thermal expansion and contraction of tiles and prevent them from cracking.

Ceramic tiles are a kind of acid and alkali resistant porcelain or stone made from refractory metal oxides and semi-metal oxides through a process of grinding, mixing, pressing, glazing and sintering.

The raw materials of tiles are mostly made of clay and quartz sand, which are mixed after high temperature compression and so on, and have very high hardness. According to the glazing, tiles can be divided into glazed tiles and unglazed tiles.

Identification of ceramic tiles: Check whether there are black spots, bubbles, pinholes, cracks, scratches, color spots, missing edges, missing corners, etc. on the surface. For vitrified tiles, pay attention to defects such as missing polishing or grinding, and whether they are deformed.

What tiles to use for bathroom walls

The bathroom wall uses tiles with low water absorption, which will increase the durability of the tiles. It is best to drip water on the back of the sample tile to test the water absorption before buying the tiles. It is recommended to use high-density wall tiles in the bathroom, so that the wall tiles are not easy to break and are easy to clean. At the same time, when laying floor tiles, it is best to choose tiles with patterns, textures or matte surfaces.

The biggest difference between the bathroom and other spaces is that there is too much moisture, so you can use tiles with low water absorption on the bathroom walls, which will also increase the durability of the tiles. When buying tiles, you can drip water on the back of the sample tile. If it penetrates slowly, this tile is more suitable for the bathroom.

It is not suitable to use too fragile and brittle bricks in the bathroom, including glazed tiles, polished tiles, etc. It is recommended to use high-density wall tiles in the bathroom. After getting the sample tiles, first check whether the brick surface is intact. At the same time, when knocking on the tiles, the crisper the sound, the higher the density, and this kind of tile can be used for paving the bathroom.

Since there is a lot of moisture in the bathroom, it is recommended to choose tiles with patterns, patterns or matte surfaces when laying floor tiles, because such tiles have a non-slip effect and are safer when bathing. At the same time, it is recommended that the colors of bathroom tiles should not be too messy, which can easily cause visual fatigue.