Will the water meter turn if the faucet is dripping? How to solve the problem of faucet dripping?

I believe that everyone is becoming more and more environmentally conscious, for the sake of our beautiful home planet. Then let's start by saving every drop of water! Faucet dripping will cause water waste and increase water bills, so after turning off the faucet, you should check whether it is leaking. If it is leaking, you can repair or replace the faucet, and you can also use a bucket to catch the dripping water to avoid wasting water resources. The following is some common sense about faucet dripping.

Contents of this article

1. Will the water meter turn when the faucet drips?

2. How to solve the problem of faucet dripping?

3. What to do if the faucet is clogged with scale

Will the water meter turn when the faucet drips?

The old water meter will not rotate when the faucet drips, but the new water meter will rotate. The old water meter uses a mechanical water meter, and dripping water will not cause the water meter to rotate. The new water meter uses a smart meter, which can calculate the water volume very accurately. In daily life, you should tighten the faucet after using water to avoid wasting water resources.

1. Old-style water meter

When the faucet drips, the old-fashioned water meter will not rotate. The old-fashioned water meter is a mechanical water meter with certain loopholes and cannot accurately calculate the flow of extremely small amounts of water. Therefore, the dripping faucet will not cause the water meter to rotate, nor will it cause an increase in water fertilizer.

2. New water meter

When the faucet drips, the new water meter will turn. The water company has replaced the new water meters for most households. These are electronic smart meters that can calculate the amount of water very accurately and are also intelligently connected to the water company. Even the smallest amount of water will cause the water meter to turn.

3. Save water

A dripping faucet will waste water resources and increase your water bill, so after turning off the faucet, you should check for leaks. If there is a leak, you can repair or replace the faucet, or you can use a bucket to catch the dripping water to avoid wasting water resources.

How to solve the problem of dripping faucet?

If the faucet is dripping, the gasket needs to be replaced. The faucet may be dripping because the gasket of the bubbler is worn and aged. Just remove the faucet and replace the gasket. It may also be that the O-rings at the faucet base and interface are damaged. The O-rings should be replaced. In addition, damage to the waterstop tape in the faucet can also cause dripping, so the waterstop tape also needs to be replaced.

1. Replace the gasket

If the faucet is dripping, the gasket needs to be replaced. The faucet may be dripping because the gasket of the bubbler has aged and been damaged during daily use, so you need to choose a gasket of the same brand and size for replacement, and the faucet will not drip.

2. Replace the O-ring

If the faucet is dripping, the O-ring seal needs to be replaced. The O-ring seal is located at the base and interface of the faucet. The faucet should be disassembled and then replaced with an O-ring seal of the same specification.

3. Replace the water stop tape

If the faucet is dripping, the waterstop tape should be replaced. Aging and wear of the waterstop tape will cause the faucet to drip. You need to take out the waterstop tape from the threaded part of the faucet, and then wrap the waterstop tape clockwise for 5 to 6 times. The problem of faucet dripping will be solved.

What to do if the faucet is clogged with scale

If the faucet is clogged with scale, you can remove the faucet, dissolve baking soda in hot water, soak the faucet in it for half an hour, take it out and clean it with toothpaste and toothbrush, rinse it repeatedly with clean water, and finally spray an appropriate amount of white vinegar. Wipe it clean after 15 minutes, or directly replace the faucet with a new one.

If the faucet is clogged with scale and water cannot flow out, you first need to remove the faucet, pour baking soda into hot water and stir evenly, soak the faucet clogged with scale in the soda water, and take it out after half an hour. This will make it easier to clean the scale that is clogged in the faucet.

Apply a proper amount of toothpaste on the scale-blocked area of ​​the faucet, brush it continuously with a toothbrush, and after it is unblocked, rinse the faucet again with clean water, spray a proper amount of white vinegar, wait for about 15 minutes, wipe the faucet clean with a paper towel, and then reinstall it.

White vinegar mainly plays the role of disinfection and sterilization, and it can also prevent the faucet from scaling again. Normally, the faucet needs to be cleaned once a month. This will not harm your health. If you don’t know how to clean the faucet scale blockage, you can also buy a new faucet.