Can the milk pot used in the induction cooker be used on the gas stove? How to replace the ignition needle of the gas stove

Gas stoves can be said to accompany people's three meals a day and serve us silently, but sometimes we may encounter small problems in use. Today we are going to see whether the milk pot used in the induction cooker can be used on the gas stove? How to replace the ignition needle of the gas stove? I hope it will be useful to you.

Contents of this article

1. Can the milk pot used in the induction cooker be used on the gas stove?

2. How to replace the ignition needle of a gas stove

3. How to replace the battery of the gas stove

Can the milk pot used in the induction cooker be used on the gas stove?

The milk pan used in the induction cooker can be used on the gas stove, but it is not recommended to use it on the gas stove frequently to avoid deformation of the bottom of the pan. If the milk pan is placed on the gas stove, it will be heated more evenly than an ordinary pot. When placing the milk pan on the gas stove, it is not recommended to dry burn it directly, otherwise it will destroy the composite bottom structure of the milk pan.

The milk pan used in induction cookers can be used on gas stoves, but it is not recommended to use it on gas stoves frequently to avoid deformation of the bottom of the pan. If it is used on an induction cooker again, poor thermal conductivity may occur.

The milk pot specially designed for induction cooker is designed according to the heating characteristics of induction cooker. If it is used on gas stove, it will be heated more evenly than ordinary pots. However, it will take longer to heat and consume more energy than ordinary pots.

When placing a milk pot on a gas stove, it is not recommended to dry burn it directly, as this will damage the composite bottom structure of the milk pot. Although there is a thermal protection function to prevent dry burning, the pot body will be damaged when the temperature is higher than 250 degrees.

How to replace the ignition needle of a gas stove

Before replacing the ignition needle of the gas stove, you need to lift the stovetop of the gas stove and unscrew the screws of the stovetop. Then open the sealing cover and the tempered glass panel of the stovetop. Find the position of the ignition needle and replace it, pierce the ignition needle through the wire, position and place the ignition needle, connect the wires, and then test the ignition condition.

First, lift up the stove top of the gas stove, and then unscrew the screws of the stove top.

After unscrewing the screws of the stove, open the sealing cover and lift up the tempered glass panel of the stove.

After opening the stove, you can see the internal structure, find the location of the ignition pin, and replace it with a new one.

Pass the ignition needle through the hole and pass the wire through it. Position the ignition needle, connect the wire, and then test the ignition condition.

How to change the battery of gas stove

When replacing the battery of the gas stove, you need to turn the gas stove upside down and find the battery compartment at the bottom. Then open the battery cover along the opening position and remove the battery inside. Replace the newly purchased battery. When installing, you need to see the positive and negative poles of the battery clearly. After the installation is completed, cover the cover and put the gas stove in its original position.

First, turn the gas stove upside down and carefully look for the battery compartment at the bottom of the gas stove.

After finding the battery compartment, open the battery cover along the opening position and remove the battery inside.

Then replace the newly purchased battery. When installing, you need to clearly see the positive and negative poles of the battery.

After the installation is completed, cover the cover and return the gas stove to its original position.