How to use a gas stove? How to ignite a gas stove

Gas stoves are used more and more frequently, and people are choosing them more and more. If you are a novice who has just purchased a gas stove, how should you start using it? The following sharing is good news for you. We will introduce you in detail from the aspects of use, ignition, and flame adjustment.

Contents of this article

1. How to use a gas stove

2. How to ignite a gas stove

3. How to adjust the flame of a gas stove

How to use a gas stove

Before using the gas stove, turn on the gas source switch first, then press the knob of the gas stove and turn it counterclockwise to 90 degrees to ignite, and keep it for about 5 seconds. After the gas stove is lit, you can adjust the size of the fire left and right, and then you can use it. When you turn it off, turn off the knob of the gas stove first, and then turn off the gas source switch.

First turn on the gas switch, press the knob of the gas stove, and rotate it counterclockwise to 90° to ignite, and maintain it for about 5 seconds.

After the gas stove is lit, you can adjust the size of the fire left and right, and then prepare the meal.

After the meal is prepared, turn off the knob switch of the gas stove and then turn off the gas source switch.

How to ignite a gas stove

Before igniting the gas stove, you need to first open the air inlet valve of the main switch, and then open the air inlet valve of the gas stove. Then turn on the ignition switch of the gas stove and adjust the gas volume. After using the gas stove, you need to first close the air inlet valve of the gas stove, and then turn off the ignition switch of the gas stove.

First open the air inlet valve of the main switch, and then open the air inlet valve of the gas stove.

Turn on the ignition switch of the gas stove and adjust the gas volume.

After using the gas stove, first close the gas stove's air inlet valve, and then turn off the gas stove's ignition switch.

If the gas stove is not used for a long time, you also need to turn off the main air intake valve.

How to adjust the flame of a gas stove

If you want to adjust the flame of the gas stove, first turn on the switch of the gas stove and check whether the flame is too big or too small. After the inspection, you can open the gas stove, remove the screws directly, take off the cover, and you will see the upper and lower dampers. You can adjust the size of the flame by rotating the gear inside the damper by hand.

First, turn on the gas stove and check whether the flame is too big or too small.

After the inspection, you can open the gas stove, remove the screws directly and take off the cover.

After taking out the cover, you will see two air doors, upper and lower.

You can adjust the flame size by turning the gear inside the damper by hand.