How to tell if you are ovulating with an egg test strip

Urine ovulation test strips have the function of monitoring ovulation and can increase the success rate of pregnancy. The ovulation test strips have a test area and a comparison area. They are tested in urine after the 10th day of the menstrual period. It is best to avoid morning urine. If only a line is seen in the comparison area during the test, the egg may not have grown. If the line in the test area is similar in color to the line in the control area, the test result is positive, and ovulation usually occurs within 36 hours. If the line in the test area is significantly darker in color than the line in the control area, it indicates a strong positive result.

Ovulation occurs within 24 hours, and the chances of pregnancy are relatively high during this period. After ovulation, the color of the test area will gradually become lighter, and a negative result will appear after 24 hours. You can also consider the growth and development of the ovarian follicles monitored by B-ultrasound, and try to have sex after ovulation to increase the probability of pregnancy.

How to use ovulation test strips?

Tear off the aluminum foil packaging bag along the wound position and remove the pregnancy test paper. Hold the test strip in your hand and insert the end with the arrow mark into the urine. Remove it after about 3 seconds and observe the result for 10-20 minutes. The result is based on reading the article within 30 minutes.

How to judge the results?

1. Two lines are measured, the lower one is the test line, and the upper one is the comparison line. The lower line is lighter than the upper one, indicating that it is the ovulation period, but it has not reached the peak of ovulation. At this time, it is necessary to continue daily testing.

2. There are two lines measured, the lower one is the test line, and the upper one is the comparison line. If the lower line is darker than or the same darker as the upper line, it means ovulation will occur within 24-48 hours. This is the best situation for having children!

3. If there is only one line on the pregnancy test paper, it means that the ovulation period has not yet arrived or the peak of ovulation has passed.

When did the inspection begin?

Because the ovulation time is different every month, the menstrual period may be early or late. Therefore, women with a normal cycle (28 days) usually start testing 12 days from the first day of their menstrual period. If you only see the comparison line but no characteristic line, you can test it every 1 to 2 days. Once a light red characteristic line appears, it means you have entered the ovulation period but have not yet reached the peak of ovulation, you need to test it every 24 hours until the characteristic line and the comparison line are the same color or darker than the comparison line, indicating that you will ovulate within 24 hours, which is the best time to conceive. Therefore, you can usually detect the peak of ovulation by measuring continuously for 4 to 5 days in a cycle, and measure the urine between 10 am and 8 pm every day for observation. Please note that you should not drink alcohol or excessive water before the test.