How to clean the dirt in the drum washing machine? What should be put in the drum washing machine for self-cleaning?

Washing machines need to be cleaned regularly every once in a while, whether it is a pulsator washing machine or a drum washing machine. The dirt inside the drum washing machine can be cleaned with a special detergent or bleach, or it can be cleaned with white vinegar and baking soda mixed with water. When cleaning the washing machine, first fill the washing machine with an appropriate amount of water, pour in detergent or a mixed solution and soak for a while before cleaning. Many drum washing machines now have a self-cleaning function, and you only need to add a special detergent. It is actually very convenient. Next, let's take a look at the encyclopedia knowledge together. What should I do if the set washing time has not arrived and I want to turn on the washing machine?

Contents of this article

1. How to clean the dirt inside the drum washing machine

2. What should be put in the drum washing machine for self-cleaning

3. How to turn on the drum washing machine when the time is not up

How to clean the dirt in the drum washing machine

It should be noted that when cleaning the washing machine, do not use 84 disinfectant for rinsing or sterilization, because 84 disinfectant has strong oxidizing and bleaching properties, which can easily cause aging of the plastic of the machine body and oxidation and rust of the metal inside the drum.

If there is a lot of dirt inside the drum washing machine, you can use warm water at about 40 degrees when adding water, so that the soaking and cleaning effect will be better.

After cleaning, it is recommended to rinse it again with clean water to clean the remaining detergent or dirt, and finally drain the dirty water.

What should I put in the drum washing machine for self-cleaning?

You need to put in a special detergent for the washing machine. Special drum detergents are available in supermarkets and outlets. There are three boxes in the drum, from left to right, for detergent, softener and softener. At the same time, it is recommended to clean the washing machine at least once every two months.

The drum washing machine is composed of a stainless steel inner barrel, a mechanical program controller, and an outer shell that has been triple-protected by phosphating, electrophoresis, and spraying.

It is combined with several heavy cement blocks to balance the huge centrifugal force generated when the drum rotates and performs repeated movements. The combined effect of detergent and water makes the clothes clean.

Drum washing machines originated in Europe, and the washing method is designed to imitate the principle of a hammer hitting clothes. Because the materials used are mainly made of steel.

How to turn on the drum washing machine when the time is not up

If you want to open the drum washing machine before the time is up, if the washing machine has a mid-time adding function, when the water temperature does not exceed 50 degrees and the water level has not reached the drum cover, you can press the pause button to open the door. If there is no mid-time adding function, turn off the power and remove the drain pipe. After the washing machine has drained all the water, open the filter door at the bottom of the washing machine, and gently pull down the emergency switch to open the door.

The drum washing machine needs to open the door midway, if the washing machine has a midway adding mode. When the water temperature does not exceed 50 degrees and the water level does not exceed the drum cover position, you can press the pause button. After waiting for 2 seconds, you can open the door of the washing machine and add clothes.

If the water level has reached the lid, the temperature is too high, or there are too many clothes, then you cannot open it. If there is no mid-time clothing adding function, you can use the emergency switch to open the door. First turn off the power button and unplug the plug.

Then remove the drain pipe and lower it to drain the water in the washing machine. Open the filter door at the bottom of the washing machine. You will see a plastic pull rod. Gently pull the pull rod vertically downward. When you hear a slight sound from the door lock, you can open the door.