What is the best way to wash a car? What does it mean to wash a car with two buckets of water?

Cars need to be cleaned regularly, but the method should also be followed. Otherwise, it will be bad if the paint is scratched during car washing. So what is the best way to wash a car? How to use the two-bucket water car washing method recommended by many people?

The best way to wash a car

As long as it can clean the car body while reducing damage to the paint, it is a good scientific method.

The two buckets of water car washing method is recommended here.

Two buckets of water means one bucket with a filter is filled with clean water, and the other bucket is filled with car wash liquid. There are several baffles at the bottom of the filter, so the water flow is always still, and the mud and sand settle at the bottom. When washing the car, wash the tools in clean water after washing each side, and then dip them in car wash liquid, and repeat this process to clean the car.

The advantage of doing this is that all the sand and gravel will settle in the clean water bucket and will not be brought into the car washing liquid or coral gloves, thus avoiding scratches on the car paint when wiping the car.

What does it mean to wash the car with two buckets of water?

Prepare tools: two buckets, a sand and gravel filter (available on Taobao), car washing gloves (or sponges), pre-wash liquid (loosening agent is used to break down the adhesion of mud and sand, and pre-wash foaming is to reduce the damage of mud and sand to the car paint when washing with a low-pressure water gun), water gun, car washing machine, water collection towel, etc.

Steps:

1. Connect the water inlet and outlet, and then absorb water;

2. Run the car, spray the pre-wash solution, the foam should be creamy, and then wait for the foam to flow all over the car body. During this time, you can clean the gaps;

3. Rinse the car body before the foam runs dry, using the water gun from top to bottom, not vertically;

4. When wiping, clean the car washing gloves once for each side;

5. When cleaning the interior, use a brush to clean the details, such as the gaps in the doors and hoods, and then rinse at low pressure;

6. After wiping the car body, rinse the foam with normal pressure and then wipe off the water on the car.

How to clean a dirty car interior

Vacuuming and tidying up the car

To clean the car interior, you must first clean the dust inside the car, clean up the large amount of dirt, and then use a vacuum cleaner to clean the dust in the gaps.

Cleaning the driving area

The dashboard and steering wheel are generally made of plastic and leather, which are easy to stick to dust, but also easier to clean. However, it should be noted that the dashboard is often exposed to the sun and is easy to age and become brittle, so it is best to choose a good quality flake wax spray and clean it with a clean cotton cloth, so that the dashboard can be well protected.