How to paste 60X120 wall tiles? How to install the corner strips of wall tiles

Friends often ask how to paste 600*1200 tiles on the wall for better effect? ​​The most commonly used 60×120 tiles can be pasted horizontally or vertically, depending on personal preference and the area of ​​the space, etc. Both paving methods can make the entire space look spacious. When laying tiles, special attention should be paid to the fact that the phenomenon of tiles expanding and contracting due to heat and cold will change to a certain extent. When laying tiles, be sure to leave enough gaps to allow them to have a certain amount of shrinkage space, otherwise it is easy to cause hollowing, falling tiles, cracking and other problems, affecting the normal life of the residents in the future.

Contents of this article

1. How to paste 60X120 wall tiles

2. How to construct the corner strips of wall tiles

3. How to stick the exterior wall tiles more firmly

How to paste 60X120 wall tiles

The 60×120 tiles can be laid horizontally or vertically, depending on personal preference and the area of ​​the space. Both laying methods can make the entire space look spacious. When laying, pay attention to laying parallel to the wall as much as possible. The tile joints should be aligned and no gaps should be left. At the same time, the joints should be grouted with a grout that is close to the color of the bricks. Pay special attention when laying tiles. Because even the same batch and the same model of tile products may have slight deviations in length, edge straightness, etc. As a result, there will be more or less errors in the process of laying tiles, and the phenomenon of tiles expanding and contracting due to heat and cold will change to a certain extent. When laying tiles, be sure to leave enough gaps to allow them to have a certain amount of shrinkage space. In addition, the wall should be carefully checked before laying tiles, and cracks in the wall should be handled in advance. When the tiles are laid, be sure to remember to inspect the tile laying to avoid problems that affect the normal life of the residents in the future.

How to construct the corner strips of wall tiles

1. Use three nails to fix the corner line at the installation location so that the tile corner line is parallel to the wall. (Note: When fixing the external corner line, reserve a space with the same thickness of tiles used to connect the wall corner line when laying tiles on the other side.)

2. Spread tile adhesive or cement on the tile corners, stick the tiles, and keep the arc surface of the tile corners tight with the tile joints.

3. Lay the tiles on the other side, and use the tiles close to the corner line to keep the contact between the corner line and the tiles smooth and seamless.

4. After the tiles are laid, clean the corners and arc surfaces of the tiles, and the installation is complete. The external corner line is also called the external corner line closing strip or external corner strip. It is a decorative line used for the 90-degree convex corner of the tile. It is made of PVC, aluminum alloy, and stainless steel.

How to stick the exterior wall tiles more firmly

1. The base layer should be cleaned before tiling. If there are decorations such as lime plaster, latex paint, wallpaper, etc. on the wall, or dirt on the ground, be sure to clean them up, otherwise the cement mortar will not adhere firmly to the base layer.

2. Wall tiles should be laid from bottom to top. For the sake of aesthetics, the bottom layer of tiles should be laid last.

3. After the wall tiles are laid, the floor tiles should be laid. If there is a half tile, it should be placed at the bottom as much as possible. In addition, a wall cannot be laid to the top at one time to prevent the tiles from collapsing due to their own weight.

4. Wall tiles have a high moisture content, and this characteristic must be taken into consideration when pasting. The base should be fully watered before tiling, and the tiles should be soaked in water for at least 20 minutes before use.