How to choose bathroom wall tiles? What are the benefits of wall tile adhesive?

The following is an introduction to how to choose bathroom wall tiles and what kind of tiles to use for living room wall tiles. If you are decorating your living room, you may want to consider the following 4 types of tile materials. I believe that everyone has a corresponding understanding after reading the sharing. I hope that the introduction of the benefits of wall tile adhesive will be helpful to everyone. If you are choosing wall tile adhesive, you can refer to the information collected by the editor.

Contents of this article

1. How to choose bathroom wall tiles

2. What are the benefits of wall tile adhesive?

3. What kind of tiles should be used for the living room wall tiles?

4. How to distinguish good and bad wall tiles

How to choose bathroom wall tiles

1. Choose a good brand. When choosing wall tiles, it is recommended to go to large shopping malls to buy them. It is best to choose a tile brand with a certain degree of popularity and good reputation, because such tiles are guaranteed in quality and people can use them with more confidence.

2. Choose the right specifications and sizes of wall tiles. When choosing bathroom wall tiles, you should decide based on the size of the bathroom. Common specifications of wall tiles on the market are: 300X300, 300X450, 300X600, 400X800. Generally, the area of ​​bathrooms is not large, so it will be better to choose tiles with smaller specifications. The specific size should be determined based on the size of your bathroom.

3. Choose the right type and color of wall tiles. In order to make the bathroom more beautiful, when choosing wall tiles, you should try to choose the same color and style as the bathroom floor tiles. Generally, the color of wall tiles should be slightly lighter than that of floor tiles. The specific color should be determined according to the owner's personal preference.

4. Choose wall tiles with good aesthetics. When choosing wall tiles, you also need to pay attention to the aesthetics of the tiles. You can choose some distinctive wall tiles, which will give people a bright feeling. Appropriately match some characteristic wall tiles with patterns to increase the beauty of the wall.

5. Choose environmentally friendly, non-radiative, and wear-resistant wall tiles. Usually, the materials and production materials of poor quality wall tiles are relatively poor, and some of them may also emit radiation. Therefore, when people choose wall tiles, it is best to choose environmentally friendly and non-radiative wall tiles.

What are the benefits of wall tile adhesive

1. Simple and environmentally friendly: The product does not add harmful substances, and no waste and dust are generated during construction. It does not pollute the environment, nor does it affect the health of construction workers. It simplifies the construction steps, and can be used by adding water and stirring on site. Tiles can be laid without soaking the bricks or wetting the wall.

2. Energy saving: In traditional tile laying technology, cement is mostly used, which is not only not strong enough in adhesion, but also consumes a lot of cement. However, tile adhesive is very material-saving. Even a thin adhesive layer of only 1.5mm can produce sufficient adhesion, which can greatly reduce the amount of materials used.

3. High safety: The falling of tiles is a terrible thing, so the reliability of tiles must be ensured. The adhesive force of tile glue is very high, which can firmly stick to tiles and prevent them from falling off. The higher adhesive strength is 2-3 times that of cement, and the tiles will not fall off when laid.

4. Maintain good decorative effect: low alkalinity, prevent calcium hydroxide and salt substances from dissolving to form efflorescence. Use a toothed scraper to scrape out the texture of the tile adhesive applied on the wall, effectively increase the full slurry when tiling, and reduce the hollow rate.

What kind of tiles are used for living room wall tiles

1. Polished tiles: Polished tiles are hard and highly wear-resistant. Polished tiles are made by using the infiltration technology and then polished, so that various patterns can be made, such as imitation stone and imitation wood. Polished tiles are used when decorating the living room, and the decorative effect is also very good.

2. Mosaic: Mosaic tiles are quite special. The overall specifications are relatively small. Generally speaking, they are composed of ten small bricks. Mosaics are used in the decoration of the living room basically for decorative effect.

3. Full-body tiles: Full-body tiles have very low water absorption and good wear resistance. The surface of full-body tiles is unglazed, and the material and color of the front and back sides are consistent. Although the color of full-body tiles is not as good as glazed tiles, it has good anti-slip properties. Most anti-slip tiles use full-body tiles.

4. Microcrystalline stone: Among many ceramic tiles, microcrystalline stone is considered a high-end product. This product is relatively mild in color and has small color difference. At the same time, it is a product with zero water absorption, not easy to be polluted, and relatively simple to clean. It can be said that it has many advantages and is therefore very popular among consumers.

How to distinguish good from bad wall tiles

1. Ask the distributor for the product's quality inspection certificate and quality inspection report.

2. Water drop test. You can drop water on the back of the tile to see how fast the water spreads and soaks in. Generally speaking, the slower the water absorption, the higher the density of the tile; on the contrary, the faster the water absorption, the sparser the density. The slower the water absorption, the better the quality. Glazed tiles (wall tiles) have a strong water absorption rate, but when the density of the body is too loose, it is not only a problem of water absorption, but also a problem of cement seepage. That is, the sewage of the cement will penetrate into the surface, causing black stains on the surface of the tile.

3. Measure with a ruler. The higher the accuracy of the side length of the tile, the better the effect after paving. Buying high-quality tiles is not only easy to install, but also saves time and auxiliary materials. Use a tape measure to measure the size of each tile. Products with a size error greater than 0.5 mm and a flatness greater than 0.1 mm will not only increase the difficulty of construction, but also have a poor effect after decoration and cannot be used in engineering.

4. Test by hand. Hold two bricks with your fingers and hit them against each other. If there is a clear and loud sound, it is a qualified product. If there is a low and dull sound, there must be an inherent quality defect.

5. Listen to the sound. Tap it with a hard object. The crisper the sound, the higher the degree of vitrification and the better the quality. You can also pinch a corner of the tile with your left thumb, index finger and middle finger, and hang it down easily. Use your right index finger to tap the middle and lower part of the tile. If the sound is clear and pleasant, it is a top-quality tile. If the sound is dull and turbid, it is a low-quality tile.