What is the general thickness of floor tiles? How to prevent kitchen flue tiles from falling off?

Ceramic tiles are a kind of acid- and alkali-resistant porcelain or stone material, which is made of refractory metal oxides and semi-metal oxides through grinding, mixing, pressing, glazing, and sintering. They are called ceramic tiles for construction or decoration. For the choice of tile thickness, the thickness of the tiles used will be different in different places. For example, the tiles used in the living room and the kitchen are different. Brick laying requires good craftsmanship to give people a comfortable and high-end feeling visually. The correct tiling method is the inevitable prerequisite for good tiling. Let us understand what is the correct tiling method for universal 80*80 tiles?

Contents of this article

1. What is the general thickness of floor tiles?

2. Correct method of laying 80X80 floor tiles

3. How to prevent the kitchen flue from falling off

What is the thickness of floor tiles?

The thickness of floor tiles is generally more than two centimeters. For the choice of tile thickness, the thickness of tiles used in different places will also be different. For example, the tiles used in the living room and the kitchen are different. Tiles should be soaked in water for half a day before use, and the brick body should not bubble. Tiles are a kind of acid- and alkali-resistant porcelain or stone, etc., which are formed by grinding, mixing, pressing, glazing, and sintering of refractory metal oxides and semi-metal oxides. Building or decorative materials are called tiles. Its raw materials are mostly mixed with clay, quartz sand, etc. Tiles are generally divided into three categories: polished tiles, antique tiles, and porcelain tiles. Kitchens and bathrooms should have a water flow slope, no water accumulation, and no water backflow. If the original waterproof layer is damaged during construction, waterproof treatment must be done, and there must be no leakage after 12 hours of water accumulation. After the floor tiles are laid, the brick surface should be covered with cardboard, etc., and it should be at least 24 hours before walking on the brick surface. When tiling pipelines, lamp switches, and supporting parts of bathroom equipment, etc., the whole brick must be cut and matched, and non-whole bricks must be used for patchwork and pasting.

The correct method of laying 80X80 floor tiles

1. Find the longitudinal and transverse center points of the room, place the "cross" line, and calculate whether the first row of bricks is odd or even based on the size of the bricks. An odd number has one brick with two corners facing the central axis, while an even number has one brick on both sides of the central axis, that is, one on the left and one on the right. Diamond-shaped floor tile laying - dry laying method for diamond-shaped floor tile laying.

2. Tile adhesive: also called dry paving, it is a relatively new paving material, which changes the wet paving method of mortar cement. This dry paving method does not require pre-immersion or wetting of the paving position. It only requires relatively good basic conditions. It not only exceeds the traditional mortar cement paving effect, but also does not require that much work. It is especially suitable for home decoration with less working surface and less ideal working environment.

3. Diamond-shaped floor tiles - Diamond-shaped floor tiles with colorful grout is a paving material that is not ordinary colored cement. It is generally used for floors or walls with gaps. The advantage is that it makes the color more fixed, pressure-resistant, wear-resistant, non-alkalizing, non-shrinking, and non-powdering. It can not only change the problem of loose adhesion, but also make the color of the gap coordinated with the tiles, and the two complement each other.

How to tile the kitchen flue without it falling off

In order to save costs, some real estate developers use a large number of prefabricated flues. Most of these flues are made of alkali-resistant glass fiber mesh cloth sandwiched in sulphoaluminate cement, or steel wire mesh and other reinforcing materials sandwiched in ordinary silicate cement. There is no big problem with the material, and the prefabricated flue is extremely thin. Therefore, the wall of the flue is easy to deform and the wall tiles are easy to fall off when there is vibration. Before tiling the flue, the experienced master will recommend the owner to wrap another layer of bricks on the outside. In this way, the tiles will not fall off when they are laid again.