What should I do if the wardrobe near the bathroom is moldy? What should I do if the wardrobe near the bathroom is moldy?

We all know that when decorating a house, many places need to be waterproofed, especially the bathroom. After some people have finished decorating, they will find that the wardrobe near the bathroom is moldy after a period of time. This is probably caused by poor waterproofing. So what is the matter with the moldy wardrobe near the bathroom? Let's take a closer look!

What causes mold in the wardrobe near the bathroom?

The wardrobe in the room near the bathroom is moldy, which means that there is a problem with the water pipe or waterproofing of the bathroom. The moisture seeps into the wall and causes moisture to return, causing the wardrobe to mold. To solve this problem, we must deal with the source, which is to solve the problem of water seepage in the bathroom.

The reasons for water seepage in the shared wall between the bathroom and the room are as follows:

1. The shower head is not installed properly

The installation of a shower in the bathroom is very knowledgeable. Proper installation is very convenient for life. Improper installation is often the root cause of dampness and mold on the wall. When installing a shower, the S-shaped two-joint is most likely to leak water, because the S-shaped two-joint is covered with a cap after installation, and it is impossible to check whether there is water leakage. If the raw tape is not used properly during installation, there will be slight water leakage. Over time, the wall will get damp and moldy, which will affect the wardrobe against the wall and cause the wardrobe to mold.

2. Waterproofing is not achieved

Sometimes the bathroom waterproofing does not see water seeping downstairs when it is in use, but this does not mean that the waterproofing is qualified. However, when the bathroom is using water, some water flows through the gaps in the tiles to the bathroom door, and then slowly seeps into the wall, gradually affecting the bathroom and bedroom shared wall. This is because the bathroom door waterproofing is not handled well, thus affecting the shared wall. The moisture of the wall affects the wardrobe and causes mold.

3. There is a problem with the bathroom water pipe

Although the probability of problems with bathroom water pipes is not very high, it does not mean that there is no possibility. Although PPR pipes are now welded, sometimes sand or impurities appear during welding, which cannot be detected even by pressure testing at the time. When living in the house, the unstable pressure of the water pipes may cause water seepage in the location where impurities exist. Over time, the walls will become damp, causing the wardrobe to mold.

4. There is a problem with the sewer pipe interface

The bathroom has a main sewer pipe, which is built by the developer, but the quality of the developer's work cannot be guaranteed, and water seepage often occurs. If the sewer pipe is directly wrapped with cement mortar without inspection during decoration, water seepage will occur as the drainage volume from the upper floor increases, thus affecting the wall, making the wall damp and causing mold in the wardrobe.

Problems in the above four situations can cause the walls of the room near the bathroom to become damp, and then the wardrobe to become moldy. It is necessary to carefully investigate the causes to find out the root cause of the problem and then solve it thoroughly.

How to troubleshoot mold in the wardrobe near the bathroom

How to troubleshoot the problem:

1. First, move the wardrobe away and check the location of water seepage on the wall in the room. If the water seepage is in the middle, then the shower head is most likely not installed properly. At this time, you can ask a professional to check the shower head.

2. If the water seepage is at the bottom, then the shower and water pipes can basically be ruled out as the cause. In this case, it is mostly because the waterproofing of the bathroom door is not done well;

3. If the water seepage is from top to bottom, then the shower head and waterproofing problems can basically be ruled out. In this case, most of the problems are caused by water pipes and sewer pipes.

Based on the above explanations and troubleshooting methods for water seepage in the walls shared with the bathroom and the room, you can determine the cause of the water seepage and then solve it accordingly.

What to do if the wardrobe near the bathroom is moldy

Solution:

1. If the problem is with the shower head, then the simplest solution is to reinstall the shower head to completely solve the water seepage problem.

2. If the bathroom door is not waterproofed, then the treatment will be more complicated. You can add a shower partition at the bathroom shower position, and then make the gaps between the bathroom wall and floor tiles beautiful, so that the water source can only reach the bathroom shower position and cannot reach the door, so that the shared wall will not be damp. This is also the simplest and most practical way to deal with the poor waterproofing of the bathroom door.

3. If the problem is with the bathroom water pipes, you can only repair the pipes. You can find the location of the pipes in the room, then plan the wall little by little, re-weld the pipes, and then restore the wall with cement mortar. This will avoid damaging the bathroom tiles, and the amount of work and losses will be minimized.

4. If the cause is water leakage in the main sewer pipe of the bathroom, the inspection method is the same as that of the water pipe.

To sum up the above, as long as the moisture problem of the wall shared by the bathroom and the room is solved, the wardrobe will naturally not get moldy in the later stage. The moldy parts now will not affect the use through treatment. Even if the mold is very serious, the panels in the wardrobe can be replaced, which is very easy.