How to clean a smart toilet? What to do if the remote control of a smart toilet fails

Smart toilets provide multiple functions for human waste discharge, which caters to people's needs and preferences. The smarter the things are, the more technological they are. They are indeed advanced, intelligent, and technological, and the experience is very good, but they are also prone to minor problems. First, let's start with the cleaning of smart toilets!

Contents of this article

1. How to clean a smart toilet

2. What to do if the smart toilet remote control fails

3. What to do if the automatic flushing of the smart toilet fails

How to clean a smart toilet

1. To clean the toilet, you can use a commercially available brush or sponge, with a neutral detergent and cold or warm water.

2. When cleaning, pay special attention to the edge of the water ring and the drain outlet below the water seal, because these two places are the places in the toilet where dirt and grime are most likely to accumulate.

3. When the toilet seat is dirty, wipe it with a cloth dipped in neutral detergent.

4. Never use gasoline, volatile liquids such as rosin, acidic solvents or hot water to wipe the toilet seat.

5. Another method is to use vinegar instead of neutral detergent, then wipe and rinse, and repeat this several times.

6. The water-stop rubber of the toilet water inlet valve is prone to aging and failure in places with poor water quality, so it must be taken out and cleaned frequently.

When cleaning, do not use abrasive or strong cleaning agents, solvents, etc. to clean the toilet and water tank accessories, so as to avoid damage to the product surface and accessories.

What to do if the smart toilet remote control fails

There are many reasons why the smart toilet remote control may malfunction. It may be that the remote control is out of power and the battery needs to be replaced; it may be that the infrared sensor is faulty and needs to be replaced in time; if using a WiFi connection, it may be caused by a network abnormality and can be solved by switching networks.

Notes on device use: 1. If the device cannot be used, it may be due to poor power contact. You need to plug in the power supply before use.

2. If the smart toilet cannot take in water, it may be that the sewer pipe is blocked and needs to be cleared in time.

3. If the smart toilet is not used for a long time, it is recommended to unplug the power supply.

4. Smart toilets need to be cleaned regularly to prevent bacteria from growing.

5. When purchasing a smart toilet, pay attention to the size to avoid installation problems. When using it, first turn on the water and then the power. Products from different brands have different functions, and you can choose according to your needs.

6. When purchasing a smart toilet, pay attention to the curvature of the toilet seat and check whether it conforms to the ergonomic design.

What to do if the automatic flushing of the smart toilet fails

1. If the automatic flushing of the smart toilet fails, first check whether the smart toilet has sufficient power.

2. If the power is normal, you can restart it to see if it works. Otherwise, it is recommended to ask the manufacturer's after-sales service to come and handle it.

3. Because the structure of the smart toilet is relatively complex, there are many reasons for the failure of the automatic flushing of the toilet, such as button failure, chip failure, water tank blockage, etc. If it is disassembled and assembled at will, it is easy to backfire.