What to do if the windows are not ventilated and warm in winter? What to do if the windows are not ventilated and warm in winter?

We all know that the weather is cold in winter and the temperature is low. Many people's windows in their homes are leaky and not warm. This is a common phenomenon. If the windows are leaking and not warm, they need to be repaired. So what should we do if the windows are not warm in winter? Let's take a closer look!

What can I do if my windows don't keep warm in winter?

In winter, due to the large temperature difference between indoor and outdoor, there is always a cold wind near the windows, which is not warm enough. This is caused by normal climate change. It is generally solved in the following ways:

Improve the sealing of windows

The first thing is to seal the windows. In winter, the temperature is low. If the sealing strips of the windows are of poor quality, they will deform and harden, resulting in poor sealing of the windows. You can test it with your hands near the gaps of the windows. If you can clearly feel the cold wind blowing into the room from the gaps of the windows, you can buy better sealing strips to replace them. They should be resistant to high and low temperatures and made of softer materials.

Another thing is the joints between windows and walls, and between window glass and window frames. The temperature changes in winter will cause the joints to crack. Choose a time when the weather is sunny and the temperature is relatively high to re-seal them with glue.

Improve the thermal insulation of windows

Some windows have poor thermal insulation due to quality problems or workmanship problems. Some strengthening measures can be taken in winter. Insulation film can be installed on the windows, which mainly blocks wind and enhances the thermal insulation of the windows.

Make double-glazed windows

You can also make double-layer windows to enhance the thermal insulation of the windows. It is suitable for windows with poor thermal insulation and sound insulation, but you don’t want to replace the original windows.

Another way is to replace the windows, which is usually done when the weather is warm, such as in summer. Generally, the reason for replacing windows is that the quality of the windows is too poor.

The simplest way is to make a thermal curtain for the window, and choose a synthetic fiber material with better sealing properties.

What to do if the windows are not warm in winter

It depends on what kind of window you have, whether it is casement or sliding.

Sliding windows have a slideway, so they are not very airtight. The gaps in the track will cause heat loss, which is more obvious when the wind pressure is high. The most you can do is to replace the fur strips, but the effect is also average.

For casement windows, check whether they are thermally-insulated aluminum or plastic-steel windows. Plastic-steel windows will deform after aging, and the sealing strips will harden over time, resulting in poor sealing. Replacing the EPDM sealing strips or silicone rubber sealing strips may have a certain effect. If the window has already deformed, the effect will not be very good, and it can only be made to do with it, after all, it can't be pressed tightly. For thermally-insulated aluminum windows, it depends on the manufacturing process. Some small workshops make shoddy products, with large gaps, uneven overall appearance, and air leakage. Replacing the sealing strips of thermally-insulated aluminum windows will have a better effect.

If it is ordinary aluminum alloy, due to the cold bridge effect, no sealing strip will work.

Finally, check the sealing effect between the window and the wall. If the gap is not tight, you can fill it with foam glue and finally seal it tightly. You need to check both inside and outside.

Tips for solving the problem of poor insulation of windows in winter

1. If the window gap is large, you can buy some sealant to fill the gap.

2. If there is a problem with the sealing parts, such as the aging of the rubber strip, just replace it with a new one. If the foam glue is aging, becoming soft and powdery, you can ask someone to re-seal it.

3. You can hang thicker curtains to block the wind and make the house feel warmer.

4. If the deformation is due to problems with the window material, you can only ask the manufacturer who installed it for you to provide after-sales service.